Elements Of The Map Screen - Magellan Roadmate Commercial RC9496T-LMB User Manual

Elements of the Map Screen

Map Screen Header Bar
Time
Wi-Fi
Bluetooth
Traffic
Signal
Status
Vehicle
Profile
RC9496T-LMB User Manual
Time is transmitted from the GPS satellites using an atomic clock as
reference. The Magellan RoadMate factors in the time zone for your
location as well as daylight savings time conditions to compute the local
time displayed. There are no settings for the time displayed.
Displays the current status of the Wi-Fi signal being received. Wi-Fi is
used to sync the device with SmartGPS Eco for content information.
Wi-Fi can be turned on or off as well as connect to a network in
Settings.
Wi-Fi is turned on in Settings and is connected to a Wi-Fi
network. The number of bars displayed (0-4) indicate the
received signal strength of Wi-Fi. Four white bars being the
strongest signal strength.
Wi-Fi is turned on in Settings but is not connected to any Wi-Fi
network.
Wi-Fi is turned off in Settings.
Displays the current pairing status of the Bluetooth connection. When
paired to a phone, the Magellan RoadMate receiver can be used as a
remote interface for your phone.
Bluetooth is paired to a phone.
Bluetooth is not paired to a phone.
This reports status of traffic reception from broadcast traffic or
(optional subscription) Internet Traffic.
For broadcast traffic, you must be in an area where traffic signals
are being transmitted and you must be using a Magellan-approved
vehicle power adapter. For Internet traffic, you must have purchased a
subscription and have an active Internet/data connection.
When the Magellan RoadMate receiver is turned on, it may take a
minute or more before any traffic information is displayed.
Traffic information is being received.
No traffic information is being received.
Subscription traffic is being received (paid)
When the RV icon is shown, routing will take vehicle profile into account,
such as weight, length, and width.
2 www.magellangps.com