Open the AUDIO tab of VirtualDJ Settings and click on the TIMECODE button. By default
VirtualDJ will auto-create 2 Timecode Inputs. Add 2 more Timecode Input lines and select
the appropriate Input Channels as per the image below
Pioneer DJM-850 – Audio Setup with 4 Timecode Inputs
Click to APPLY.
Press PLAY on your timecode CD and/or Vinyl device and VirtualDJ will automatically detect
your Timecode type and make the appropriate adjustments for best performance.
Open the TIMECODE tab of the VirtualDJ Settings and choose the CALIBRATE button if for
any reason the signal is not detected (possibly due to reversed phase connections).
Click on the ON buttons from the TIMECODE panels of the Default Skin (in the SCRATCH
center panel) to enable the Timecode control to any of the 4 software decks.
Timecode Detection
Timecode buttons - 4 Decks GUI (Scratch Panel)
VirtualDJ 8 – Pioneer DJM-850
14