Additional Display With Selector Button - Miele T 6251 Operating Instructions Manual

Description of the machine

Additional display with selector button

Display
Selector button "Residual moisture" /
"Time" / "Vented air"
"Residual moisture" (%)
With this button the programmed residual
moisture values in programmes
be altered.
"Time" (h/mins)
With this button the programme duration can
be changed in programme
to 1.00 hour), and in programme
utes to 3.00 hours).
- These changes can only be carried out be-
fore the start of the programme. Changes are
only valid each time for one selected pro-
gramme. At the end of the programme the val-
ues set revert to the standard values. -
"Temperature of vented air" (
If the button is pressed in while a programme
is running and released immediately, the cur-
rent vented air temperature will show in the ad-
ditional display for approx. 5 seconds. There
is no display for the "TR" models.
"Residual moisture" / "Time" / "Vented air"
display
(Standard programming, see p. 19)
"Residual moisture" (%)
Display of the residual moisture set for pro-
1 9
grammes to .
A few minutes after the programme has
started the residual moisture in the laundry is
recorded and displayed.
Selector button
Indicator lights
1 9
to can
0
(003 minutes
!
(003 min-
o
C)
The current residual moisture values are
shown continuously during the programme.
"Time" (h/mins)
Display of the time set for programmes
!
and .
The hours are shown in the left hand display
field and the minutes in the other two fields.
After the programme has started the remain-
ing time left to run is shown instead of the total
time.
"Vented air temperature" (
Display of the current vented air temperature
while a programme is running. Display lasts
for approx 5 seconds. There is no display for
the "TR" models.
Note:
After the start button has been pressed a turn-
ing circle is shown for a short time in the dis-
play (meant to represent the turning drum of
the dryer).
Indicator lights "Residual moisture" /
"Time left"
"Residual moisture"
Lights up when the machine is switched on
1
and programme
9
or is chosen.
It goes out at the end of the programme.
"Time left"
Lights up when the machine is switched on
and a programme between
!
and is chosen.
It goes out at the end of the programme.
9 «M.-Nr.04989220/02 - GB - »
0
o
C)
0