Table of Contents
Related Manuals for Miele T 6251
Summary of Contents for Miele T 6251
-
Page 1: Operating Instructions
Operating Instructions Tumble Dryers T 6251 / T 6351 T 6551 / T 6751 T 6551 TR It is essential to read these operating instructions before installing or using the machine to avoid the risk of accident, or damage to the M.-Nr.04989220/02... - Page 2 - These instructions consist of 26 pages. - - Diese Gebrauchsanweisung besteht aus 26 Seiten.- «M.-Nr.04989220/02 - GB - »...
-
Page 3: Table Of Contents
Contents Page Warning and Safety instructions ....... . Caring for the environment ........Description of the machine . -
Page 4: Warning And Safety Instructions
If the filling Faulty components must only be ex- falls out it could cause a fire. changed for Miele original spare parts. Some textiles get very hot during drying Only when these parts are fitted can the safety and there may be a risk of high tempera- standards of the machine be guaranteed. - Page 5 Accessory parts may only be fitted when motor. expressly approved by Miele. If other parts Heater limiters stop the tumble dryer. are used, guarantee, performance and prod- In this case please check the seals and locks uct liability claims may be invalidated.
-
Page 6: Caring For The Environment
Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Rather than just throwing these materials away, please ensure they are offered for recy- cling. -
Page 7: Description Of The Machine
Description of the machine Tumble dryer (T6251 / T6351 / T6551 / T6751) 1 -Main switch 5 -Fluff filter 2 -Control panel 6 -Fluff compartment flap 3 -Drum door 7 -Four adjustable screw feet 4 -Door handle 8 -Venting pipework / Venting socket Control panel 9 -"Re-set"... -
Page 8: Pushbutton Switches / Programme Selector
Description of the machine Push button switch Programme selector “On-Off s ” switch “ L Low temperature” switch Lowers the drying temperature for delicate fab- The programme selector switch is used to se- rics (e.g. acrylics). lect the programme required. Press in the button switch to select this function. -
Page 9: Additional Display With Selector Button
Description of the machine Additional display with selector button The current residual moisture values are shown continuously during the programme. “Time” (h/mins) Display of the time set for programmes The hours are shown in the left hand display field and the minutes in the other two fields. After the programme has started the remain- Selector button Display... -
Page 10: Programme Sequence And Check Lights / Fault Messages
Description of the machine Programme sequence and check lights “Venting” The venting duct is blocked or badly restricted. Action: Check the vent ducting and if necessary clean it. “Fluff filter” Drying The fluff filter is clogged. Action: Clean the fluff filter at the end of the Cool air programme. -
Page 11: Reset" Button / Emergency Stop Switch
Description of the machine “ y & Re-set” push button - Only for machines with gas heating.- If the button lights up this indicates an ignition fault. Wait for at least one minute before push- ing the button to re-set. “Emergency Stop”... -
Page 12: Before Using For The First Time
Significance of symbols: = Dry at normal temperature Weights of load (Dry weight) = Dry at low temperature = Do not tumble dry T 6251 T 6351 T 6551 T 6751 Drum volume Articles made from pure wool and wool mix- tures tend to become matted and shrink. -
Page 13: Programme Selection
Selecting a programme Close the drum door. without heating (15 mins) For airing laundry Switch on the mains switch (on site). with heating (20 mins) To dry small loads or Press in the “ s On/Off” switch. to finish off drying individual items. -
Page 14: Coin Operation Unit
Selecting a programme Important: Before drying bedding a re-pro- The end of the drying programme is indi- gramming of the standard options must be r Anti-crease / End” light cated by the “ carried out with lighting up and the buzzer sounding if selected. (see table at the top of page 19). -
Page 15: Notes
Note Anti-crease selected or is turned to “End” to finish the pro- gramme.- If the laundry is not removed from the machine at the end of the programme an anti-crease phase switches in automatically. There is “Emergency stop” switch drum movement at intervals to minimise creas- Operate this switch only in a moment of dan- ing in the laundry. -
Page 16: Altering A Drying Programme - Examples
Note Changing individual drying programmes by reprogramming. (Changing the standard options) Individual drying programmes can be changed and adapted to special requirements, usage and processes. Note When a coin operation unit is fitted the stand- Press in the “ s On-Off” switch. ard options cannot be reprogrammed. - Page 17 Notes Example 1: Altering the drum reversing action period (standard = 1 minute and 27 seconds) in the cotton programmes. A drum reversing action period can be se- lected between 20 seconds and 2 minutes. Here a reversing time of 1 minute and 5 sec- onds is chosen.
- Page 18 Note To leave the programming level: Turn the programme selector to - “P3" and ”3" are shown alternatively in the additional display. - Use the selector switch to choose the pro- Release the “ s On/Off” switch. gramme to be changed. Machine iron rr (20%).
-
Page 19: Reprogramming Possibilities / Programmable Residual Moisture
5 secs, after the selector button is pressed) 1 = temperature only 2 = residual moisture only Programme position is not occupied. Programmable residual moisture values Programme T 6251 / T 6351 T 6551 / T 6751 Notes Enter Options Options programmed options here... -
Page 20: Cleaning And Care
Cleaning and care Before cleaning disconnect the machine from nearest Miele Sales office. See back page for the power supply via the mains switch. address. For dryers with gas heating the gas manual stop tap must be shut and the gas valve at the The following should be checked and if neces- entry meter shut off. -
Page 21: Meaning Of The Symbols On The Data Plate
1 Machine type Noise emission 2 Serial number of the machine Registered on the “A” scale. 3 Voltage/Frequency 4 Mains fusing T 6251 67,7 dB 5 Drive motor T 6351 72.7 dB 6 Plate diameter/Plate qty * T 6551 74.2 dB... -
Page 22: Notes For The Installer
(available from your Miele Dealer or the Miele Spare Parts Machines heated by gas and electricity must Department). not be installed in the same room as dry clean-... -
Page 23: Adjustable Feet
This machine has been constructed in accord- ance with current safety standards and com- plies with the following standards: T 6251 and T 6351 with IEC 335-1 and IEC 335-2-11, T 6551 and T 6751 with EN 60204-1 The electrical connection may only be carried out by a fully competent person in accordance with local and national safety regulations. -
Page 24: Steam Connection
Please consult the Miele Cus- tomer Service department or an authorized 4. Ensure that the heat exchanger does not Service dealer. - Page 25 Notes: «M.-Nr.04989220/02 - GB - »...
- Page 26 United Kingdom Miele Co Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: Abingdon (01235) 554455 - Fax (01235) 554477 Service Office, tel Abingdon (01235) 554466 Telephone calls may be monitored and recorded to improve our service. Alteration rights reserved 12.03...