Using Mobile-High Definition Link - Dell S2415H User Manual

Using the Mobile-High Definition Link (MHL)
NOTE: This monitor is MHL certified.
NOTE: To use the MHL function, use only MHL certified cable and source devices
that support MHL output.
NOTE: Some MHL source devices may take more than a few seconds or longer to
output an image, depending on MHL source devices.
NOTE: When the connected MHL source device enters Standby mode, the monitor
displays a black screen or the message below, depending on MHL source device's
output.
To enable MHL connection, please perform the below steps:
1 Plug the power adapter to your monitor and to a power outlet.
2 Connect the (micro) USB port on you MHL source device to HDMI (MHL) port on
the monitor with a MHL certified cable (See
3 Turn On the monitor and the MHL source device.
4
Select input source on monitor to HDMI (MHL) by using OSD Menu (See
On-Screen Display (OSD) Menu
5 If the monitor does not display an image, see
Specific Problems.
Bottom View
for details).
Mobile High-Definition Link (MHL)
Setting Up the Monitor
for details).
Using the
23
|