Dell S2415H User Manual page 34

Reset Color
Settings
Display
Aspect Ratio
Horizontal
Position
Vertical
Position
Sharpness
Pixel Clock
Phase
Dynamic
Contrast
Response
Time
34
| Operating the Monitor
Reset your monitor's color settings to the factory settings.
Use the Display menu to adjust image.
Adjusts the image ratio to Wide 16:9, 4:3, or 5:4.
Use or to adjust the image left or right.
Minimum is '0' (-).
Maximum is '100' (+).
Use or to adjust the image up or down.
Minimum is '0' (-).
Maximum is '100' (+).
NOTE:
Horizontal Position and Vertical Position adjustments are only
available for "VGA" input.
This feature can make the image look sharper or softer.
Use or to adjust the sharpness from '0' to '100'.
The Phase and Pixel Clock adjustments allow you to adjust your monitor
to your preference.
Use or to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use
the Pixel Clock (coarse) adjustment and then use Phase (fine) again.
NOTE:
Pixel Clock and Phase adjustments are only available for "VGA"
input.
Allows you to increase the level of contrast to provide sharper and more
detailed image quality.
Use to select the Dynamic Contrast "On" or "Off".
NOTE:
Dynamic Contrast provides higher contrast if you select Game
or Movie preset mode.
Allows you to set the Response Time to Normal or Fast.