Specific
Symptoms
Mobile High-Definition Link (MHL) Specific Problems
Specific
Symptoms
MHL interface is
not working
48
|
Troubleshooting
What You
Experience
2 Use the
"mDP"
3 Press and hold the
sec.
4 The DP configuration message will appear:
5 Using the
Secondary or
purpose of illustration only. Appearance of the
computer may vary.
What You
Experience
Cannot see
• Ensure your MHL cable and MHL device are MHL
MHL device
image shown
• Check your MHL device is turned on.
on the monitor
• Check your MHL device is not in standby mode.
• Check physical MHL cable connection is
• Wait for 30 seconds after connecting MHL cable
Possible Solutions
or
button to set to monitor to
to exit without making changes.
CAUTION: The Graphics are used for the
Possible Solutions
certified.
corresponding to input source selected on OSD
Menu: HDMI (MHL).
as some MHL devices require longer recovery
time.
button to highlight "DP" or
key for approximately 8