DirecTV H25 User Manual page 35

2. Activate DIRECTV Whole-Home DVR Service:
®
Once DIRECTV Whole-Home DVR service is activated on your
®
account, press the LIST button on your remote. The message on
the right will display, confirming the service has been enabled.
Select "Continue".
3. Name Your Locations:
You'll be prompted to give each receiver a name. We refer to this
as "Location." We recommend using a name that you'll easily
associate with the room or it's location, such as, "Living Room."
The name must be 14 characters or less. You must be at the
receiver to assign its name.
After you've assigned a Location Name, you can change it as
follows: Press MENU, select "Settings & Help," then "Settings,"
"Whole-Home" and then "Name Location."
4. Set Playlist Sharing Options (HD DVR only):
During initial setup, if the receiver is an HD DVR, you'll be
prompted to set the following Playlist sharing options:
DIRECTV WHOLE-HOME DVR SERVICE
®
35 35