Hoover HARMONY Instruction Manual page 5

ASSEMBLING YOUR CLEANER The cleaner should be switched
off and disconnected from the mains supply before you start to
assemble.
1. Connect the hose body connector to
the cleaner.
3. Fit the other end of the telescopic
wand to the hand piece, making sure
of a tight fit.
WHITE MARK
5. Never extend the power cord further
than the white mark.
2. Insert the wand into the all-purpose
floor tool.
4. You can extend or reduce the length
of the wand by moving the slider.
6. Suction can be varied by opening or
closing the slider control.
5