Congratulations on your purchase of your new HOOVER vacuum cleaner. There are many useful features built into your cleaner and we recommend that you carefully read this instruction book so that you may take best advantage of them. BEFORE YOU BEGIN...
PROTECTING THE ENVIRONMENT When you have unpacked the unit, do not simply throw the packing into the household waste. Take them to an appropriate collecting point for the recycling. HOOVER Harmony 220-240V 50Hz 1800W MAX App. No: Q080096 N127...
Page 4
SUCTION CONTROL TELESCOPIC WAND TOOL CADDY* BAG-FULL INDICATOR VARIABLE SPEED CONTROL CORD REWIND ON/OFF SWITCH * There is a crevice tool located beneath the rear ALL PURPOSE FLOOR HEAD filter compartment.
Page 5
ASSEMBLING YOUR CLEANER The cleaner should be switched off and disconnected from the mains supply before you start to assemble. 1. Connect the hose body connector to 2. Insert the wand into the all-purpose the cleaner. floor tool. 3. Fit the other end of the telescopic 4.
CHANGING THE DUST BAG The cleaner should be switched off and disconnected from the mains supply. 1. Change the bag when the indicator 2. To remove and replace dust bag, turns to red. open dust bag cover. 4. Remove bag by pulling up and out 3.
CHANGING FILTERS The cleaner should be switched off and disconnected from the mains supply. Never operate without filters as damage to cleaner could occur. 1. Open dust bag housing and lift up 2. Bag removed allowing easy access and remove bag assembly. to motor filter.
Page 8
This guarantee applies in Australia and New Zealand only. For the guarantee in another country, please contact your local retailer/distrubutor. Your new Hoover cleaner, which has been your new cleaner will render excellent fully tested, inspected and adjusted, service, and therefore, the purchaser...