Procedure; Torque Measurement; Step 1A - Mount Vehicle Ram Mount Bracket - Honeywell VX6 Installation Instructions Manual

Procedure

Torque Measurement

You will need a torquing tool capable of torquing to 50 inch pounds (5.64±.56 N/m).
Torque all screws and bolts according to the following table:
For these screws and bolts...
1/4 bolts
Step 1a – Mount Vehicle RAM Mount Bracket
Note: If you are using the RAM clamp mount, please skip to
1. Determine the position for mounting the RAM ball base. Be sure to position the RAM bracket to allow access to the
switches and ports on the bottom of the VX6.
2. Attach the RAM ball base to the vehicle mounting surface using four 1/4 bolts (or equivalent) fasteners.
Note: 1/4 bolts not included.
IMPORTANT: Mount to the most rigid surface available.
Torque to
50.0±5 in/lb (5.64±.56 N/m)
Step 1b.
3-11