Canon PIXMA MP970 series Quick Start Manual page 128

4
When the Check Wired LAN Connection
dialog box appears, connect the machine to
the network devices such as hubs with a LAN
cable, then click Yes.
(A) Wired LAN connector
W
Note
The connection may vary depending on your network
environment.
5
Confirm that the setup program detects the
machine automatically.
The machine connected with the USB cable is
detected automatically via LAN connection.
In Windows Vista, go to step 7.
In Windows XP and Windows 2000, go to step 6.
T"~ioIhl"lll¥«llkaddrP.MdMc4ed~.
s....
lPalb...
ollhepnflltobelXll"l'lllCtOc
~
···~~,Q;;;,I)·~~
W
Note
If the machine was not detected, the Set Printer IP
Address dialog box appears. Make sure of the
following, then click Connect.
• The network devices such as hubs or routers are
turned on, and the machine and the computer are
connected to the network.
• The machine is connected to the computer with the
USB cable.
• The IP address to be set for the machine is
displayed on the Set Printer IP Address dialog
box. If it is different from the address you want to
set for the machine, enter the desired IP address
on the Set Printer IP Address dialog box.
(If the machine is turned off, the Set Printer IP
Address dialog box does not appear.)
If it still fails, see "The Set Printer IP Address dialog
box is displayed during setup" on page 29.
*GIlIPIdlhN~
{) URI
Ilelt
IP-**"'
1P-"
:t......
WlIIk:
.QafdG*-y.
11?
om "
~.
~
:ss
255
(l
-lgz----:Qi-~-·1·1~.. 1····
6
When the Network Setup of the Card Slot
dialog box appears, specify the drive letter,
then click Next.
W
Note
The Card Slot of the machine must be mounted to
be used as the memory card drive of the LAN-
connected computer.
To write files to a memory card, set the Read/write
attribute setting under Device settings to LAN
enabled. If the setting is set to USB enabled, you
cannot access the network drive of the Card Slot.
8
;~ M~~hJm.t.;~.ltI~~.~tt'
,s~""IMIIr.d-tIli:~ 1~
' , :""l!
;' _ >: ,.