Samsung LN32B530 User Manual page 41

• Troubleshooting for Anynet+
Problem
Anynet+ does not work.
- - - - _
..
_ - - -
I want to start Anynet+.
I
Possible Solution
The message Connecting to
II-
You cannot use the remote control when you are configuring Anynet+ or switching to a
Anynet+ device... appears on the
I
view mode
~creen:..
.
-+~
Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not
I-
You cannot use the play function when Plug & Play is in progress
play. . .
The TV program cannot be
II -
Check whether the antenna jack on the recording device is properly connected.
recorded.
-T-h-e-TV--s-o-u-nd-i-s-no-t-o-u·-t-p-u-t
---II-
Connect the optical cable between TV and the receiver
through the receiver.
I