Samsung LN32B530 User Manual page 17

Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-
way splitter, an RF (AlB) switch and four lengths of RF cable. (These items are available at most electronics stores.)
ANT IN
.........
.
~~@
TV Rear
Cable Box
1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
l0
This terminal miflht be labeled 'ANT IN', 'VHF IN' or simply, 'IN'.
2. Connect this cable to a two-way splitter.
3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
4.
Connect an RF cable between the ANT OUT terminal on the cable box and the B-IN terminal on the RF(AlB) switch.
5.
Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (AlB) switch.
6. Connect the last RF cable between the OUT terminal on the RF (AlB) switch and the ANT IN terminal on the rear of the TV.
After you have made this connection, set the AlB switch to the 'A' position for normal viewing. Set the AlB switch to the 'B'
position to view scrambled channels. (When you set the AlB switch to 'B', you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)
• Connecting a OVO
I Blu-ray player I Cable Box I Satellite receiver (Set-Top Box) via HOMI
This connection can only be made if there is an HDMI Output connector on the external device.
TV Side Panel
-
@
,l;lJ:<
C!j •
'I,~f
••
I
r
TV Rear Panel
...............................
..
-
1 - - - - - - or - - - - - -
l •
1
0
HOMI Cable (Not supplied)
OVO
I
Blu-ray player
I
Cable Box
I
Satellite receiver (Set-Top Box)
1. Connect an HDMI Cable between the HOMIIN (1,2 or 3) jack on the TV and the HOMI jack on the DVD
I
Blu-ray Player or
Cable Box I Satellite receiver (Set-Top Box).
l0
What is HDMI?
• HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable
• The difference between HDMI and OVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed.
l0
Each DVD
I
Blu-ray player
I
Cable Box
I
Satellite receiver (Set-Top Box) has a different back panel configuration.
l0
The TV may not output sound and pictures may be displayed with abnormal color when OVD
I
Blu-ray player
I
Cable Box
I
Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HOMIIN 1 jack and the audio cables to the OVIIN (HOMI1)
[R-AUOIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD I Blu-ray player I
Cable Box I Sate!lite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.
l0
HOMI cables that are not 1.3 may cause annoying flicker or no screen display.
;ll:1ft.J~~L~~~i ~;~~~t!~~~~~
~(.,;;f~,>
••
~,,~
\
~~ ~~~¢t;;