P.MODE Press to select the picture mode. Use these buttons in the DMA and Anynet+ modes. (∏: This remote can be used to control recording on Samsung recorders with the Anynet+ feature) Selects the TV mode directly. PRE.CH Enables you to return to the previous channel you were watching.
Installing the Stand Back Front Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Attach your LCD TV to the stand. Two or more people should carry the TV. ➣ Make sure to distinguish between the front and back of the stand when attaching it. ➣...
Connections Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration. ➣...
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables TV Rear Panel Component Cable (Not supplied) Audio Cable (Not supplied) Connecting a VCR TV Rear Panel Audio Cable (Not supplied) DVD Player or Cable Box / Satellite receiver (Set-Top Box) VCR Rear Panel Video Cable...
Connecting a Digital Audio System TV Rear Panel Optical Cable (Not supplied) When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and ➣ adjust the volume level with the system’s volume control. 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Connecting a Camcorder Using a Video Cable Camcorder Using an HDMI Cable HD Camcorder TV Rear Panel Audio Cable (Not supplied) Video Cable (Not supplied) TV Rear Panel HDMI Cable (Not supplied) English- Connect a Video Cable between the AV IN [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.
Connecting a PC Using a D-Sub Cable TV Rear Panel D-Sub Cable (Not supplied) PC Audio Cable (Not supplied) Using an HDMI/DVI Cable TV Rear Panel HDMI/DVI Cable (Not supplied) .5 mm Stereo mini-plug/ RCA Cable (Not supplied) Using an HDMI Cable TV Rear Panel HDMI Cable (Not supplied) Using a D-Sub Cable...
Press the POWER button on the remote control. You can also use the POWER button on the TV. Viewing the Menus With the power on, press the MENU button. The main menu appears on the screen. The menu’s left side has the following icons: Picture, Sound, Channel , Setup, Input, Application, Support.
You can delete or add a channel to display the channels you want. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTERE button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTERE button.
Your television has several setting options that allow you to control the picture quality. To select the desired picture mode, follow the “Changing the Picture Standard” instructions numbers 1 and 2. Press the ▲ or ▼ button to select “Backlight”, “Contrast”, “Brightness”, “Sharpness”, “Color”...
Press the SOURCE button on the Remote Control You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you would like to watch. Available signal sources: TV, AV, Component, PC, HDMI1/DVI, HDMI2, HDMI3. ➣...
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. (726-7864) Problem Poor picture Poor sound quality. No picture or sound.
Page 14
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comuníquese con SAMSUNG WORLDWIDE Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG.