Date And Time; Viewing The Current Date And Time; Setting The Date And Time - Honeywell VISTA-20PSeries User Manual

Viewing the Current Date and Time

The system lets you view its time and date setting on an alpha keypad.
(Security Code)
OR,
Press the function key (A, B, C, or D) for viewing
current date and time, if programmed.
A typical time/date display is shown.
The display will remain on for about 30 seconds.
" A "
If one of the above keys has been programmed for the date/time display feature,
place a check mark in the box beneath that key.

Setting the Date and Time

You can set the time and date by doing the following:
1.
(Security Code)
2. Press [∗] when the time/date is displayed.
A cursor appears under the first digit of the hour.
To move cursor ahead, press [ ∗ ]. To go back, press [#].
• Enter the 2-digit hour setting.
• Enter the 2-digit minute setting.
• Press [1] for PM or [0] for AM.
• Enter the last two digits of the current year.
• Enter the 2-digit month setting.
• Enter the 2-digit day setting.
3. To exit, press [∗] when cursor is at the last digit, or
wait 10 seconds.
+ [#] + [6] [3]
" B " " C " " D "
+[#] + [6] [3]

Date and Time

Alpha Display:
✱✱✱✱
DISARMED
READY TO ARM
TIME/DATE SAT
12:05AM_05/09/00
Alpha Display:
✱✱✱✱
DISARMED
READY TO ARM
TIME/DATE SAT
04:04PM 10/17/00
Current time display
TIME/DATE SAT
04:04P2000/10/17
Time/date editing display
✱✱✱✱
✱✱✱✱
– 25 –