Product Overview - Es Series - Raymarine eS Series Installation Instructions Manual

2.5 Product overview - eS Series

Your multifunction display includes the features listed
below.
D13274-1
• MultiTouch capable LCD
• Raymarine HybridTouch controls
• NMEA 0183
• NMEA 2000 via SeaTalk ng
• Bluetooth
• Wi-Fi
• Internal GNSS (GPS / GLONASS) receiver
• Composite Video input
• HDMI video input (Not available on eS7x displays.)
• GA150 GNSS Receiver antenna (Not available
on eS7x displays.)
HybridTouch overview
If your multifunction display features HybridTouch,
this enables you to operate the unit using the
touchscreen and the physical buttons.
A HybridTouch display has physical buttons
which can be used in addition to the touchscreen.
Touchscreen only multifunction displays (which
do not have physical buttons) can be connected
to a remote keypad which allows HybridTouch
functionality.
All functions can be accessed using the touchscreen.
However, there may be situations (such as rough
sea conditions) when it is not appropriate to use
the touchscreen. In these situations, Raymarine
strongly recommends that you activate the touch
lock and use the physical buttons to operate your
multifunction display.
14 eS Series installation instructions