Modem Troubleshooting - Toshiba PORTEGE M780 Maintenance Manual

2.11 Modem Troubleshooting

To check if modem is malfunctioning or not, follow the troubleshooting procedures below as
instructed.
Procedure 1:
Procedure 2:
Procedure 1
Execute Modem test in the LAN/Modem/Bluetooth/IEEE1394 test program. Refer to Chapter
3, Tests and Diagnostics for more information on how to perform the test program.
If any error is detected, perform Procedure 2.
Procedure 2
MDC (Modem Daughter Card) is used as the modem for this computer. MDC is connected to
the system board. If modem malfunctions, the connection of cable, board and module may be
defective. Otherwise, they may be faulty.
Disassemble the computer following the steps described in Chapter 4, Replacement Procedure
and perform the following checks:
Check 1 Make sure the following connections are firmly connected.
PORTEGE M780 Maintenance Manual (960-809)
Downloaded from LpManual.com Manuals
Diagnostic Test Program Execution Check
Connector Check and Replacement Check
Diagnostic Test Program Execution Check
Connector Check and Replacement Check
If any connector is disconnected, connect it firmly and return to Procedure 1. If the
problem still occurs, perform Check 2.
Troubleshooting Procedures
[CONFIDENTIAL] 2-47