4.8 Memory module (slot B)
4.8
Memory module (slot B)
CAUTION: The power must be turned off when you remove the memory module.
Removing the memory module
To remove the memory module, make sure the computer is in boot mode and powered off.
Then perform the following procedure. (See Figure 4-11 and 4-12.)
1. Loosen the screw securing the memory slot cover and remove the memory slot cover.
PORTÉGÉ M780 Maintenance Manual (960-809)
Downloaded from LpManual.com Manuals
Removing the memory module with the power on risks damaging the module
or the computer itself.
Do not touch the memory module terminals. Any dirt on the terminals may
cause memory access problems.
Never press hard or bend the memory module.
Figure 4-11 Removing the memory slot cover (slot B)
4 Replacement Procedures
Screw
Memory slot cover
[CONFIDENTIAL]
4-23