Memory Module; Memory Module Slot - Toshiba Tecra A3 Series Resource Manual

32
Setting up your computer and getting started
You need a standard Phillips no. 1 screwdriver to install a

memory module.

If the computer is on, begin at step 1, otherwise, skip to
step 3.
1 If the computer is on, click Start, Turn Off Computer.
The Turn off computer window appears.
2 Click Turn Off.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the
computer.
4 Close the display panel and turn the computer upside
down to locate the memory module slot cover to the

memory module slot.

If you use the computer for a long time, the memory modules will
become hot. If this happens, let the modules cool to room
temperature before you replace them.
Do not try to install a memory module under the following
conditions. You can damage the computer and the memory module.
1. The computer is turned on.
2. The computer was shut down using Standby mode.
3. Power to the DVD-ROM or multi-function drive has been turned
on.
Do not install or remove a memory module while the DVD-ROM
drive power is on.
To avoid damaging the computer's screws, use a standard Phillips
no. 1 screwdriver that is in good condition.