Toro Reelmaster
4000?D Service Manual page 82

23. Install drive spacer(s), when used, in meter, see
Fig. 49.
24. Install 3" diameter seal in end cap.
25. Install end cap on gerotor, align holes.
26. Install 7 dry cap screws with new seal washers in
end cap. Pre−tighten screws to 150 inch pounds, ten
torque screws to 275 inch pounds in sequence shown
in Fig. 50.
Hydraulic System Page 4 − 50
Figure 49
Figure 50
Reelmaster 4000−D