Vision Fitness TF20 Service Manual page 20

Heart Rate Default Target Heart Rate
Default: 85%
Brightness Brightness
Default: 75%
Virtual Active VA Message
Message Default: on
Virtual Active VA Music
Music Default: on
Use the same operation as Max Workout Time to adjust the other Default information.
Press "Restore" to restore to the factory settings.
2.6.4 ENGINEERING MODE (Touch Console) – Region Tab
The Region Tab is used to set Date, Time, Language, Country, and Units. Touch the item that needs to be set, the screen
will display a number keypad. Use the keypad to set the information, and press "Home" to save the information. Refer to
the figure below:
This option enables you
heart rate for some heart rate programs
This option enables you
panel brightness level
This option enables you
user can choose the VA message
displayed on the screen or not
This option enables you
user can choose the VA music played or
not
to set target Maximum:100%
Minimum: 0
to set the LCD Maximum:100%
Minimum: 0
to set the VA, On/off
to set the VA, On/off
Number setting keypad
HOME ICON
20