Vision Fitness TF20 Service Manual page 18

2.6.2 ENGINEERING MODE (Touch Console) - Settings Tab
The Settings Tab used to set the Machine Type, Model and if the Energy Saver is turned on.
Setting: Pressing the
frame type to select the appropriate machine, TREADMILL, ELLIPTICAL or BIKE.
Use the same procedure as Machine Type to set the Model Type, Energy Saver, First Boot and Program Speed.
2.6.3 ENGINEERING MODE (Touch Console) – Default Tab
The Default Tab displays the default information of the console, such as Workout Time, Weight, Age etc...
Selecting the data that needs to be set will bring up a slider to adjust the corresponding information. Refer to the figure
below:
will automatically bring up the corresponding select block, according to the
automatically bring up
the corresponding
select block
18