Hardware Setup; Overview; Before You Begin - IOGear GCL1908 User Manual

Overview

The GCL1908 / GCL1916 is a switch designed to work with USB and PS/2
interfaces. It utilizes custom KVM cables that serve as intermediaries between
the switch and computers. A custom KVM cable is required for each computer.
Custom cables of various lengths are listed on page 3. Consult your dealer to
find out which custom KVM cables best fit your needs.

Before you Begin

1. Important safety information regarding the placement of this
device is provided on page 53. Please review it before
proceeding.
2. Make sure that power to all the devices you will be connecting
up has been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.

Hardware Setup

Chapter 2
9