Hardware Setup - IOGear GCS1932M User Manual

Hardware Setup

Hardware Installation
Please make sure that all devices including the GCS1932M/1934M, DisplayPort monitor,
and computers are powered OFF
1. Connect the USB keyboard and the USB mouse to the GCS1932M/1934M Console ports
located on the rear side panel.
2. Connect the HDMI and/or DisplayPort monitor(s) to the GCS1932M/1934M Console ports
located on the rear side panel. For multiple monitor setups, see Display Modes section.
3. Turn monitor(s) power to ON.
4. Connect the main microphone and speakers into the GCS1932M/1934M microphone and
speaker jacks located on the front side panel. The microphone and speakers connected
into this front port have priority over those connected on the rear port. (optional)
5. Connect the secondary microphone and speakers into the GCS1932M/1934M Console
microphone and speaker jacks located on the rear panel. (optional)
6. Using the provided cables with this package,
a. Connect the provided DisplayPort connector into any available DisplayPort
port in the KVM Port section of the GCS1932M/1934M
b. Connect the provided USB, microphone, and speaker connector into
their corresponding USB, microphone, and speaker ports on the
GCS1932M/1934M
c. Connect the other end of the KVM cables into their respective DisplayPort,
USB, microphone, and speaker ports on the computers
7. Connect up to two USB peripherals into the USB 3.0 type A ports (front and rear panel of
the GCS1932M/1934M).
8. Connect the provided power adapter to an AC power source. Then, connect the power
adapter cable into the GCS1932M/1934M power jack.
9.Turn all connected computers power to ON
Note:
Verify that all the connectors are on the same KVM Port sockets (all in Port 1, all in Port 2,
etc.) and that each socket is marked with an appropriate icon to indicate itself.
By default, the GCS1932M/1934M switches to the first computer that is powered ON.
We recommend that the total video cable length from the computer to the console monitor
cannot exceed 3 meters.
Please make sure that only high quality video cables used in order to achieve 4K DCI (4096
x 2160 @60Hz) resolution.
10