BenQ SW Series User Manual page 14

5. Connect USB devices.
Connect the USB cable between the PC and the
monitor (via the upstream USB port at the back). This
upstream USB port transmits data between the PC and
the USB devices connected to the monitor.
Connect USB devices via other USB ports
(downstream) on the monitor. These downstream USB
ports transmit data between connected USB devices
and the upstream port.
See picture on the right.
6. Connect the memory card.
Insert a SD, MMC, or MS memory card following the
direction indicated on the card to exchange files.
Supported memory card formats are as follows:
- SD / SDHC / SDXC
- MMC
- Memory Stick / Memory Stick Pro
- MS Duo / MS-Pro Duo
7. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
14 How to assemble your monitor hardware
Downloaded from ManualMonitor.com Manuals