Maintenance; Optional Accessories - DeWalt D25011K Manual

E N G L I SH

MAINTENANCE

Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing set-ups or
when making repairs. Be sure the trigger
switch is in the OFF position. An
accidental start-up can cause injury.
This machine is not user-serviceable. Take the
•
tool to an authorised D
after approximately 40 hours of use. If
problems occur before this time contact an
authorised D WALT repair agent.
E
The tool will automatically switch off when the
•
carbon brushes are worn.
Motor Brushes
D WALT uses an advanced brush system which
E
automatically stops the drill when the brushes
wear out. This prevents serious damage to the
motor. New brush assemblies are available at
authorised D WALT service centers. Always use
E
identical replacement parts.
Lubrication
Your power tool requires no additional lubrication.
Accessories and attachments used must be
regularly lubricated around the SDS Plus
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or other
harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
N376054
10
WALT repair agent
E
® fitment.
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.

Optional Accessories

WARNING: Since accessories, other
than those offered by D
been tested with this product, use of
such accessories with this tool could be
hazardous. To reduce the risk of injury,
only D WALT, recommended accesso-
E
ries should be used with this product.
Various types of SDS Plus
available as an option.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the house-
hold, at municipal waste sites or by the retailer
when you purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D WALT products once they have
E
reached the end of their working life. To take
advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D WALT office at the address indicated in this
E
manual. Alternatively, a list of authorised DEWALT
repair agents and full details of our after-sales
service and contacts are available on the Internet
at: www.2helpU.com.
WALT, have not
E
drill bits and chisels are
®
WALT
E
10/2013