Using Your Café Latte; Making Lattes - Mr. Coffee Café Latte User Manual

Ready to serve
A. Raise the on/off lever and remove
the latte pitcher from the base.
B. Pour latte into serving glasses and
spoon any additional foam desired
to complete your latte.
Pour & Enjoy
English 8
USING YOUR CAFÉ LATTE
CLEAN YOUR APPLIANCE BEFORE USING THE FIRST TIME
Make sure your first latte is as good as can be by cleaning your MR. COFFEE
Latte before its first use. Just follow these simple steps:
1. Wash latte pitcher and lid using a mild, non-abrasive detergent and water with a
soft cloth.
IMPORTANT! Do not immerse your pitcher/lid in water or place in a dishwasher. This
may permanently damage the product and void the warranty.
2. Replace the pitcher onto the appliance and run a cycle with water only, without
adding coffee or coffee filter. Fill the water reservoir to the single serving level
and fill the latte pitcher to the single serving level.
3. When cycle is complete, turn your appliance off, discard the water in the pitcher
and rinse the pitcher, pitcher lid, and brew basket.
Your appliance is now ready to use. Enjoy it!
CLEAN YOUR LATTE PITCHER AFTER EVERY USE
The MR. COFFEE® Café Latte should be cleaned after every use.
1. Pour out remaining liquids from the latte pitcher.
2. Remove the lid and rinse with water.
3. Wash the pitcher by pouring a combination of a mild detergent and water into
the pitcher and wipe clean with a soft damp cloth. Do not use any abrasive
detergents or scouring pads, as this will scratch the glass and heating element of
the pitcher.
IMPORTANT! Do not immerse your pitcher/lid in water or place in a dishwasher. This
may permanently damage the product and void the warranty.
4. Wipe the exterior of the machine with a damp cloth.

MAKING LATTES

1. Just Add Water and Coffee.
a. Lift the brew basket lid up and put a paper filter into the brew basket along
with ground espresso or coffee.
b. Add cold water into the reservoir up to desired water level marking, single
or double serving .
2. Now add ingredients to the latte pitcher.
a. Remove the pitcher from its base and remove the lid by twisting counter
clockwise.
b. Add milk to the desired level marking, single
(should correspond to the water level used in the reservoir).
c. Add any other ingredients per the recipe book.
d. Secure the lid onto the pitcher, by twisting clockwise, and place the pitcher
back onto the base with the pitcher handle facing out.
NOTE: Do not exceed the max fill line as it could cause liquid to enter the motor
located in the pitcher lid and permanently damage the frothing function.
®
or double serving
English 9
Café