Table of Contents
Advertisement
Jack*
A jack is used to raise the car, e.g. when
changing the tyres.
The original jack should only be used for
changing to the spare wheel. The jack's
thread must always be well greased.
NOTE
The normal car jack is only designed for
occasional, short-term use, such as when
changing a wheel after a puncture, chang-
ing to winter/summer wheels, etc. Only the
jack for the specific car model may be
used to raise the car. If the car is to be
jacked up more often, or for a longer time
than is required just to change a wheel,
use of a garage jack is recommended. In
this instance, follow the instructions for
use that come with the equipment.
Tools - returning into place
The tools and jack* must be returned to their
correct places after use. The jack needs to be
cranked together to the correct position in
order to have space.
The foam block and spare wheel are replaced
in the reverse order to taking out. Note that
there is an arrow on the upper foam block. It
must point forwards in the car.
IMPORTANT
The tools and jack* must be stored in the
intended location in the car's cargo area
when not in use.
NOTE
If the floor hatch in the cargo area floor is
not closed then privacy locking does not
work.
Related information
•
Warning triangle (p. 331)
•
Emergency puncture repair* (p. 341)
09 Wheels and tyres
First aid kit*
The first aid box contains first aid equipment.
A case with first aid equipment is located
under the floor in the cargo area.
NOTE
If the car has been locked with privacy
locking then the boot lid/tailgate and floor
hatch cannot be opened, see Privacy lock-
ing* (p. 175).
*
Option/accessory, for more information, see Introduction.
09
}}
333
Advertisement
Table of Contents
