Table of Contents
Advertisement
05 Loading and storage
||
For safety reasons, the safety grille must
always be correctly fastened and secured
when being refitted.
The backrests must first be lowered to allow
the safety grille to be fitted, see Seats, rear
(p. 84).
NOTE
The safety grille is most easily fitted/
removed by two people via the rear doors.
During fitting the handle should be on the
front of the grille, see the
illustrations
.
05
*
164
Option/accessory, for more information, see Introduction.
Position the handle in fitting position in
accordance with the illustration. Press
gently on the handle to enable it to be
turned into position.
Press the strut in towards the grille and
align the grille in the roof mounting.
Turn the handle 90° . Press gently as in
the illustration (1) if necessary. Secure the
grille by angling the handle 90° .
•
Removal of the grille takes place in
reverse order.
Related information
•
Safety net* (p. 162)
•
Loading (p. 158)
Advertisement
Table of Contents
