JLG 600SJ Service And Maintenance Manual page 46

SECTION 2 - GENERAL
AREA
Walk-Around Inspection Performed
Annual Machine Inspection Due
No Unauthorized Modifications or Additions
All Relevant Safety Publications Incorporated
General Structural Condition and Welds
All Fasteners, Pins, Shields, and Covers
Grease and Lubricate to Specifications
Function Test of All Systems
Paint and Appearance
Stamp Inspection Date on Frame
Notify JLG of Machine Ownership
Footnotes:
1
Prior to use each day; or at each Operator change
2
Prior to each sale, lease, or delivery
3
In service for 3 months or 150 Hours; or Out of service for 3 months or more; or Purchased used
4
Annually, no later than 13 months from the date of the prior inspection
Performance Codes:
1 - Check for proper and secure installation
2 - Visual inspection for damage, cracks, distortion or excessive wear
3 - Check for proper adjustment
4 - Check for cracked or broken welds
5 - Operates Properly
6 - Returns to neutral or "off" position when released
7 - Clean and free of debris
8 - Interlocks function properly
9 - Check for signs of leakage
10 - Decals installed and legible
11 - Check for proper fluid level
12 - Check for chafing and proper routing
13 - Check for proper tolerances
14 - Properly lubricated
15 - Torqued to proper specification
16 - No gouges, excessive wear, or cords showing
17 - Properly inflated and seated around rim
18 - Proper and authorized components
19 - Fully charged
20 - No loose connections, corrosion, or abrasions
21 - Verify
22 - Perform
23 - Sealed Properly
24 - Drain, Clean, Refill
2-8
Table 2-3. Inspection and Preventive Maintenance Schedule
1
Pre-Start
Inspection
21
21
– JLG Lift –
INTERVAL
Weekly Monthly
Preventive Preventive
Maintenance Maintenance
2
4
Pre-Delivery
Annual
3
(Yearly)
or Frequent
Inspection
Inspection
21
21 21
21 21
2,4 2,4
1,2 1,2
22 22
21 21, 22
7 7
22
22
Every 2
Years
3121202