Ocr Maximum Characters; Ocr Security Level - Motorola DS6878 Product Reference Manual

OCR Maximum Characters

Parameter # 690
To select the maximum number of OCR characters (including spaces) per line to decode, scan the following
bar code, then scan a three-digit number between 003 and 100 using the numeric keypad in
Advanced Data Formatting
greater than the maximum are ignored. The default is 100.
OCR Maximum Characters

OCR Security Level

Parameter # 554
To select the OCR decoding security/confidence level, scan the following bar code, then scan a two-digit
number using the numeric keypad in
confidence. Greater numbers minimize OCR decoding errors but reduce performance. Setting a value that is
too high can result in failure to decode. Setting a value that is too low can cause decoding errors. The range of
the security level is 10 - 90 and the default is 80.
represents the number of OCR characters to decode. Strings of OCR characters
Chapter 16, Advanced Data Formatting
OCR Programming 14 - 13
Chapter 16,
represents the level of
OCR Security Level