5 - 34 DS6878 Product Reference Guide
Fuzzy 1D Processing
Parameter # 514
This option is enabled by default to optimize decode performance on 1D bar codes, including damaged and
poor quality symbols. Disable this only if you experience time delays when decoding 2D bar codes, or in
detecting a no decode.
*Enable Fuzzy 1D Processing
Hand-held Decode Aiming Pattern
Parameter # 306
Select Enable Hand-held Decode Aiming Pattern to project the aiming pattern during bar code capture,
Disable Hand-held Decode Aiming Pattern to turn the aiming pattern off, or Enable Hand-held Decode
Aiming Pattern on PDF to project the aiming pattern when the digital scanner detects a 2D bar code.
NOTE With
Decode Aiming Pattern is disabled.
*
Enable Hand-held Decode Aiming Pattern
Enable Hand-held Decode Aiming Pattern on PDF
(1)
Picklist Mode on page 5-28
(2)
(3)
Disable Fuzzy 1D Processing
enabled, the decode aiming pattern flashes even when the hand-held
Disable Hand-held Decode Aiming Pattern
(0)
(0)