Alarm Temperature Setting - Panasonic MDF-U76V Operating Instructions Manual

ALARM TEMPERATURE SETTING

This unit is provided with the high and low temperature alarm and the temperature at which the alarm is
activated is changeable.
The following procedure shows the setting of alarm temperature according to the condition below:
High temperature alarm: activates at the temperature 5
Low temperature alarm: activates at the temperature 5
Note:
The alarm temperature is set at the factory 10
The available range of alarm temperature is between 5
temperature.
Table 3. Procedure for setting high temperature alarm
Description of operation
1
Press numerical value shift key for
2
about 5 seconds.
Press numerical value shift key
3
and scroll the figure to 1.
4 Press set key.
Scroll the figure to 005 by using
5 digit shift key and numerical value
shift key
6 Press set key.
Table 4. Procedure for setting low temperature alarm
Description of operation
1
Press numerical value shift key for
2
about 5 seconds.
Press numerical value shift key
3
and scroll the figure to 2..
4 Press set key.
Scroll the figure to -05 by using
5 digit shift key and numerical value
shift key
6 Press set key.
• The setting mode returns to the temperature display mode automatically when 90 seconds has passed
without any key operation.
o
C higher than the set temperature
o
C lower than the set temperature
o
C higher and lower than the set temperature.
o
C and 40
Key operated
The current chamber temperature is
----
displayed.
The first digit is flashed.
The first digit is flashed.
SET The first digit is flashed.
When pressed, the figure of settable
digit changes.
When pressed, the changeable digit
moves.
Alarm temperature is memorized and
SET the current chamber temperature is
displayed.
Key operated
The current chamber temperature is
----
displayed.
The first digit is flashed.
The first digit is flashed.
The first digit is flashed.
SET
When pressed, the figure of settable
digit changes.
When pressed, the changeable digit
moves.
Alarm temperature is memorized and
SET the current chamber temperature is
displayed.
16
o
C higher or lower than the set
Indication after operation
Indication after operation