Searching For A Desired Song; Usb Memory (Optional); Playback Mp3/Wma/Aac Files From Usb Memory (Optional) - Alpine CDE-W265EBT Operating Instructions Manual

Searching for a desired song

Artist name, album name, etc., may be searched and displayed during
playback or pause.
1
Press ENTER to activate the search mode.
2
Turn the Rotary encoder to select the desired Group
(Folder), and then press ENTER.
3
Turn the Rotary encoder to select the desired album,
folder, etc., within the selected Group (Folder), and then
press ENTER.
4
Repeat step 3 if necessary until the desired song is found.
Notes
• Search mode may differ depending on the paired device.
• The pause mode may be canceled after the search.
• This function may not available depending on the paired device.

USB Memory (optional)

 CDE-W265EBT
/SOURCE
 CDE-164EBT
/SOURCE
Playback MP3/WMA/AAC Files from USB
Memory (optional)
If a USB Memory device is connected to the unit, MP3/WMA/AAC files
can be searched and played back.
1
Press VSOURCE to select the USB AUDIO mode.
2
To pause playback, press .
Pressing  again will resume playback.
Notes
• This unit plays back files in USB Memory with the same controls and
modes used for playback of CDs containing MP3/WMA/AAC. For
details, refer to "CD/MP3/WMA/AAC" on page 12.
• The root folder is displayed as "\ROOT".
• Before disconnecting USB Memory, be sure to change to another source
or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
USB Memory
(sold separately)
or
Cable (sold
USB Memory
separately)
(sold separately)
USB Memory
(sold separately)
or
Cable (sold
USB Memory
separately)
(sold separately)
35
-EN