Table of Contents
Advertisement
Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Note: The information displayed depends on the currently selected input source.
Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10
hours. Available settings depend on the current input source.
Information item
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
3D Format
Sync Info
Description
Displays the number of hours (H) the lamp has been used in each
Power Consumption mode
Displays the name of the port to which the current input source is
connected
Displays the input signal type setting of the current input source
Displays the resolution of the current input source
Displays the scan mode (progressive or interlaced)
Displays the refresh rate of the current input source
Displays the 3D format of the current input source
Displays information that may be needed by a service technician
79
Advertisement
Table of Contents
