Table of Contents
Advertisement
focus near, far or automatically.
Run Preset/ Cruise/ Sequence
After setup the Preset/ Cruise/ Sequence lines according to PTZ Settings, select a Preset/ Cruise/
Sequence line and start it by clicking on the <Run> button (
PT Speed (1~10)
Set a number between 1 and 10 as the PT Speed every time users pan or tilt the Camera via the Pan &
Tilt Direction Control Panel. 1 is the slowest, 10 is the fastest.
Set Center Mode
Right click on the Live Video Pane and select <Set Center Mode>. Then users can position the interest
area in the center of the Live Video Pane automatically by clicking on the point of interest. In <Set
Center Mode>, right click on the Live Video Pane again and select <Set Emulated Joystick Mode> to
return to control the Camera direction by left clicking and dragging the pointer
.
Pane
Talk
Talk function allows the local site talks to the remote site. Please refer to section
user > Talk/Listen for further details. This function is only open to "User" who has been granted this
privilege by the Administrator.
Snapshot
Press the
button, and the JPEG snapshots will automatically be saved in the appointed place.
The default place of saving snapshots is: C:\. To change the storage location, please refer to section
4.3.9 Snapshot
for further details.
Speaker
Press the
button to mute/activate the audio.
Video Pause / Restart
Press the
stop button to disable video streaming, the live video will be displayed as black. Press
the restart button to show the live video again.
Recording
Press the
button to save video recordings from the Live View to the specified location.
Zoom Adjustment
Click on the buttons wide/tele to control zoom in/out. Move the cursor closely onto the zoom adjustment
bar and click on the desired position to change the room ratio.
- 30 -
/
/.
).
on the Live Video
4.3.2
Security: Add
Advertisement
Table of Contents
