Hdmi Setup - Denon AVR-1612 Manual

HDMI Setup

Make settings for HDMI video/audio output.
Setting items
Auto Lip Sync ON : Compensated.
Make automatic OFF : Not compensated.
compensation for timing
shift in audio and video
output.
HDMI Audio Out AMP : Play back through speakers connected to the unit.
Select HDMI audio output TV : Play back through TV connected to the unit.
device.
• The audio signal input from the HDMI input connector can be output as
an output signal from the HDMI output connector by setting the HDMI
audio output destination to TV.
Audio signals input via the Analog/Coaxial/Optical input connectors
cannot be output from the HDMI output connector.
• When the HDMI control function is activated, priority is given to the TV
audio setting
HDMI Control ON : Use HDMI control function.
You can link operations with OFF : Do not use HDMI control function.
devices connected to HDMI
and compatible with HDMI
• When a device that is not compatible with the HDMI control function is
Control.
connected, set "HDMI Control" to "OFF".
• Please consult the operating instructions for each connected device to
check the settings.
• Refer to "HDMI control function"
about the HDMI control function.
NOTE
• When "HDMI Control" is set to "ON", it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
• "HDMI Control" does not work when the power to the device is off.
Either turn power on or set to standby.
• The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
• If the "HDMI Control" settings have been changed, always reset the
power to connected devices after the change.
BD
Default settings are underlined.
Setting details
(vpage 42 "HDMI control function").
(vpage 42) for more information
Setting items
Standby Source Last : This item is set at the last-used input source.
Sets the HDMI input source HDMI1 / HDMI2 / HDMI3 / HDMI4 : Put the respective input source into
to put into standby when standby.
the power is on.
"Standby Source" can be set when "HDMI Control" is set to "ON".
P.Off Control All : If power to a connected TV is turned off independently of the input
Links the power standby of source, power to this unit is automatically set to standby.
this unit to external devices. Video : If power to a connected TV is turned off when the input source
is BD / DVD / TV / SAT/CBL / GAME / V.AUX / DOCK, power to this unit is
automatically set to standby.
OFF : This unit does not link with power to a TV.
"P.Off Control" can be set when "HDMI Control" is set to "ON".
62
System Setup
Setting details