Blade Drive; Circuit Breaker; Throttle Control Lever - Dixon SPEEDZTR 38 Safety Instructions & Operator's Manual

BLADE DRIVE:

•Located on the control panel, on operator's right.
•To engage the mower blade, pull up on the switch.
•To disengage mower blade, push down.

CIRCUIT BREAKER:

•Protection of the electrical system is by (1) 15 amp
circuit breaker.
•If circuit breaker trips, push button to reset.
•If this condition repeats, consult dealer for inspection
and repair.

THROTTLE CONTROL LEVER:

•Located on control panel to operator's right.
•Throttle control for engine speed.
•Choke for engine starting (38 & 42" models only).
44" model has a seperate choke cable.
•Throttle control should be set to MAXIMUM or wide
open setting to insure adequate cooling of the engine
and to maintain mower deck blade speed while
mowing.
CONTROLS
21