Mechanism Adjustment - Pioneer XV-EV1000 Service Manual

1

6.2.5 MECHANISM ADJUSTMENT

A
Tangential and Radial Height Coarse Adjustment
1
START
• Remove the 05SD Pickup Assy from the Traverse Mechanism Assy-S.
• Remove the joint and the joint spring of the 05SD Pickup Assy.
Note:
B
Before removing the flexible cable for the
pickup, soldering of the pickup circuit is
necessary.
For details, see "7.1.11 DISASSEMBLY".
• Pass through the guide shaft to a new 05SD Pickup Assy.
• Attach it to the Traverse Mechanism Assy-S.
C
D
• Put the joint between the Tangential (or Radial) adjustment screw and the mechanism base
and turn each screw to adjust the height.
(Refer to "6.2.1 ADJUSTMENT ITEMS AND LOCATION".)
E
• Attach the Traverse Mechanism Assy-S to the 05 LOADER Assy.
• Turn it over and attach the joint and the joint spring.
• Arrange the flexible cables.
(Refer to "7.1.11 DISASSEMBLY".)
F
94
1
2
Guide Shaft
XV-EV1000
2
3
05SD Pickup Assy
Joint
Joint Spring
05SD Pickup Assy
Joint
7.5mm
Mechanism base
3
4
4