HoMedics ME Quick Reference Manual page 5

how to use
step 1: preparing for me
Watch our demonstrational video at www.mepower.com
Remove hair in the area you intend to treat with a razor or electric shaver, or
alternatively, use the dedicated
step 2: sensitivity test
Before treating any new area with
you intend to treat.
step 3: treating with me
Body:
1. Press the power button on the base unit to turn the
system on.
2. Select the appropriate
1
It is recommended to start on Low and if you feel
comfortable use a higher
3. If you are using the designated shaver/ epilator,
connect it in place of the protective cap and press the
accessory button on the control panel once to run the
2
epilator mechanism at low speed. If desired, press it again
to run the epilator at high speed.
The shaver cartridge operates only at speed level 1.
4. Press the
3
4
6 EN
epilator/ shaver accessory
, test a small patch of skin near the area
level (Low- Medium or High).
level.
activation button on the applicator.
5. Place the applicator on the area you want to treat,
ensuring full contact of the two silver RF delivery bars with
the skin. Do not press, just gently touch the skin.
System will start emitting
5
6. Glide the applicator slowly and continuously on the
treatment area without stopping in one place.
Do not return to the same spot for at least 10 seconds.
Face:
Removing unwanted hair from the face is very different from removing
unwanted hair from the body. Please read the user guide thoroughly before
starting to remove facial hair using your
instructional video for face treatment on www.mepower.com.
When treating facial hair, it is recommended to use the
face adaptor. The face adaptor has been designed to
accommodate smaller and more delicate treatment
areas on the face. It delivers energy in single pulse mode
at the desired energy level.
The face adaptor may or may not be included with
this package but can be purchased separately as an
accessory. Face adaptor design may change.
Note: You may treat hair on the face from the
cheek line and down
facial skin tones
is suitable for all skin tones. Make sure you perform a skin sensitivity test
before you start your treatment (refer to the user guide for more info).
pulses.
. Be sure to watch the dedicated
EN 7