Lexmark T650 User Manual page 143

Understanding printer menus
Menu item
Collate
Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)
Sides (Duplex)
2 sided
1 sided
Staple
Off
On
Duplex Binding
Long Edge
Short Edge
Orientation
Auto
Long Edge
Short Edge
N‑up (pages‑side)
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
N‑up Border
None
Solid
Description
Stacks the pages of a print job in sequence when printing multiple copies
Note: On is the factory default setting.
Controls whether the job prints on one side or both sides of the paper
Note: 1 sided is the factory default setting.
Specifies whether print jobs are stapled
Notes:
• This menu item is available only when the StapleSmart II Finisher is installed.
•
Off is the factory default setting. Print jobs are not stapled.
Defines the way duplexed pages are bound and how the printing on the back of the
page is oriented in relation to the printing on the front of the page
Notes:
•
Long Edge is the factory default setting.
•
Long Edge specifies that binding be placed on the left edge of portrait pages
and the top edge of landscape pages.
•
Short Edge specifies that binding be placed on the top edge of portrait pages
and the left edge of landscape pages.
Specifies the orientation of a multiple‑page sheet
Notes:
•
Auto is the factory default setting. The printer chooses between portrait and
landscape.
•
Long Edge uses landscape.
• Short Edge uses portrait.
Specifies that multiple‑page images be printed on one side of a sheet of paper
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Prints a border around each page image when using N‑up (pages‑side)
Note: None is the factory default setting.
143