Advertisement
In order to obtain the best results and to maintain your Rinnai built-in hob in the best
condition, please read the instruction carefully.
Components and parts names
Pan Support H
Simmer Burner Head
H Burner Head
H Burner Body
Knob
Casing
Tempered Glass
Stainless Top Plate
Fig. 1
- 1 -
Trouble Shooting Manual for Rinnai RB-
FAUL
T
CAUSE
S p a r k e l e c t r o d e i s w e t ,
1.No Ignition
especially in high humidity
season.
2. Flame cannot
Incorrect turning of gas control
be held.
knob.
Gas regulator has been turned
3. No main flame.
off.
4. Yellow flame.
Accumulated grease and dirt on
the burner.
5. Unstable flame.
Incorrect location of burner
head.
Attention: when installing the casing
•
Adjust screw position as bench cut out size.
•
Confirm that four screws are secured firmly into the casing.
Built-In Hob
7502D-SSS/GBS
REMEDY
Dry the electrode with clean
tissue or dry cloth.
Push and turn the gas control
knob anti-clockwise until a
'click' sound is heard. Hold for
a few seconds until flame is
ignited.
Open gas regulator completely.
Wash the burner in warm water
with detergent. Leave it to dry,
then place it back in the correct
position.
Refit burner head into burner
ring.
- 6 -
Advertisement
