Fuser Lower Frame Assembly Removal; Fuser Upper Frame Assembly Removal; Fuser Paper Separator Removal - Lexmark Optra E 4026-0XX Service Manual

4026-0XX

Fuser Lower Frame Assembly Removal

1. Remove the top cover.
2. Remove the fuser upper frame assembly.
3. Remove the four fuser lower frame assembly mounting screws.
4. Use a screwdriver to unlatch the left end of the fuser cable cover
and remove the cover.
5. Remove the fuser lower frame assembly.

Fuser Upper Frame Assembly Removal

1. Remove the top cover.
2. Remove the left and right transfer assembly mounting brackets
on models 4026-06A, 06B, 06D, and 06J. Remove the left and
right transfer assembly mounting screws on models 4026-06C
and 06F.
3. Remove the five screws that hold the fuser upper frame
assembly and the left hand gear assembly.
4. Disconnect the exit sensor and thermistor cables.
5. Remove the fuser upper frame assembly.

Fuser Paper Separator Removal

1. Remove the top cover.
2. Remove the fuser upper frame assembly.
3. Note the type and location of each separator. The location and
type are determined during manufacture.
4. Use a screwdriver to release the latch that holds the separator
in position.
5. Remove the paper separator.
4-8