IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the display assembly, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the display panel (see
6.
Remove the keyboard (see
7.
Remove the top cover (see
8.
Remove the hard drive (see
9.
Remove the USB board (see
10.
Remove the WLAN (see
11.
Remove the system board (see
Remove the display assembly:
Battery on page
34).
Display panel on page
Keyboard on page
38).
Top cover on page
42).
Hard drive on page
USB board/audio jack on page
WLAN module on page
System board on page
36).
46).
49).
50).
53).
Component replacement procedures
71