Printing Information Pages; Printing A Font Sample List; Printing A Directory List; Printing The Print Quality Test Pages - Lexmark E460dw User Manual

Lexmark printer user's guide
Hide thumbs Also See for E460dw:
Table of Contents

Advertisement

If you enter an invalid PIN, the Invalid PIN screen appears.
To re-enter the PIN, make sure Try again appears, and then press
To cancel the PIN, press the down arrow button until Cancel appears, and then press
9
Press the down arrow button until

Printing information pages

See "Printing a menu settings page" on page 36 and "Printing a network setup page" on page 37 for more information
on printing these pages.

Printing a font sample list

To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the down arrow button until Reports appears, and then press
4
Press the down arrow button until Print Fonts appears, and then press
5
Press the down arrow button until
press
.
After the font sample list prints, Ready appears.

Printing a directory list

A directory list shows the resources stored in flash memory or on the hard disk.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the down arrow button until Reports appears, and then press
4
Press the down arrow button until Print Directory appears, and then press
After the directory list prints, Ready appears.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down
and the right arrow button while turning the printer on.
3
Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
appears next to the job you want to print, and then press
.
appears next to PCL Fonts or PostScript Fonts, and then
.
Printing
64
.
.
.
.
.
.
.

Advertisement

Table of Contents
loading

Table of Contents