Table of Contents
Advertisement
Menu item
Print Recovery
Jam Recovery
Auto
On
Off
Print Recovery
Page Protect
Off
On
Factory Defaults
Do Not Restore
Restore Now
Setup menu
Menu item
Printer Language
PCL Emulation
PS Emulation
Description
Specifies whether the printer reprints jammed pages
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the pages
is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
•
Off sets the printer to never reprint jammed pages.
Lets the printer successfully print a page that may not have
printed otherwise
Notes:
•
Off is the factory default setting. Off prints a partial page when
there is not enough memory to print the whole page.
•
On sets the printer to process the whole page so that the
entire page prints.
Returns the printer settings to the factory default settings
Notes:
•
Do Not Restore is the factory default setting. Do Not Restore
keeps the user-defined settings.
•
Restore Now returns all printer settings to the factory default
settings except those in the Network/Ports menu. All
downloads stored in RAM are deleted. Downloads stored in
flash memory are not affected.
Description
Sets the default printer language
Notes:
•
PostScript emulation uses a PS interpreter for processing print
jobs. PCL emulation uses a PCL interpreter for processing print
jobs.
•
The factory default printer language is PCL Emulation.
•
Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Understanding printer menus
73
Advertisement
Table of Contents
