Sony HDW-730 Operation Manual page 277

When you select the file No. where the data has been saved:
The message "OVERWRITE OK YES NO" appears. In this
case, the t mark is placed at the left of NO, and NO blinks.
To stop overwriting, press the MENU knob. Repeat step 2.
To overwrite, move the t mark to YES (YES blinks) and push
the MENU knob.
You can select the contents of the user file to be displayed on the
page.
For details, see "Selecting the display contents" on page 4-145.
4
To end menu operations, set the MENU ON/OFF switch to OFF, or
close the cover.
To return to the SCENE FILE page
After the message "COMPLETE!" is displayed in step 3, move the
t mark to ESC at the right top of the window by turning the
MENU knob and push the MENU knob.
The SCENE FILE page appears again.
Data of the white balance to be stored in the scene file
Data of the white balance to be stored in the scene file depends on the
setting of SCENE WHITE DATA on the REFERENCE page of the
FILE menu.
Chapter 4 Adjustments and Settings for Recording
4
4-141