Sony HDW-730 Operation Manual page 238

Item
HD SDI OUT
REAR BNC OUT
a)
SEL
4
TEST OUT SELECT
DOWN CON MODE
a) When an HKDW-702 (not supplied) is not installed, these items
are not displayed on the OUTPUT SEL page.
4-102
Chapter 4 Adjustments and Settings for Recording
Content
Sets whether or not the video signal is output
from the HD SDI OUT connector. When OFF
is selected, the HD SDI circuit is
disconnected, which saves power.
Selects the type of the video signal to be
output from the VBS/SDI OUT connector (one
b)
of VBS/SDI /OFF). When OFF is selected,
the down converter stops. This saves power.
a) Selects the type of the video signal to be
output from the TEST OUT connector. When
HD is selected, the HD-Y signal is output.
When SD is selected, the down-converted
color composite signal is output.
a) Selects the conversion mode of the down
converter among SQEZE, LETTR and CROP.
SQEZE: The picture is displayed without
distortion on a monitor with the 16:9 aspect
ratio. On a monitor with the 4:3 aspect ratio,
the picture is distorted horizontally.
LETTR: Displays the picture without distortion
on a monitor with the 4:3 aspect ratio, the
video signal of the 16:9 aspect ratio is output
by adding a blank area (no signal, black) top
and bottom.
CROP e) : Cropping both the left and right sides
of a video image with the 16:9 aspect ratio, a
video signal with the 4:3 aspect ratio is output.
c)
d)