Network Interface Errors - Lexmark E120 User Manual

Network interface errors

Light sequence:
• Continue—On
• Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
• Continue—On
• Paper Jam—On
• Error—On
Message:
Printer cannot establish communication with the network.
Solution:
• Press to clear message and continue printing. (may not print correctly).
• Press and hold
Host interface disabled
Light sequence:
• Continue—On
• Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
• Continue—On
• Load / Remove Paper—Blinking
• Paper Jam—Blinking
• Error—On
Message:
Printer USB or network port has been disabled.
Solution:
• Press to clear message. The printer discards all jobs previously sent.
• Enable the network port by selecting a value other than Disabled for the Network Buffer item in the Local
Printer Setup Utility (see Software and Documentation CD).
Using the operator panels
to reset printer (may need to send the job again).
Overview of the Lexmark E120n operator panel
38
Primary light Secondary light
sequence
sequence
Primary light
Secondary light
sequence
sequence